Silicone products in the process of forming processing method that isn't ripe in!

by:ZheRunTai     2020-04-05
< p> general will appear a few problems in molding silicone products, one of the most serious is the product are not ripe, BaoFeng, hurt bad, lack of material, etc. , these are the problems often encountered in the production process, and are not familiar with the silicone products can also be divided into several kinds of situation, local not familiar and unfamiliar parts, all are not ripe, they are not familiar with these can all be to improve production technology, and control the production parameters of the machine can effectively solve the problem! The following taught by zhe run too detailed technical department all the silicone products in the process of forming processing method that isn't ripe in! < / p> < / p> < p> < / p> < p> in the production of silicone products are not familiar with local is the most not easy to find, often do not practice place is less, or seems obvious enough, will flow to the next to the process, usually when forming the mold, should be self-checking, self-checking discovery, by control checks next procedure again! < / p> < p> < / p> < p> silicone products parts are not ripe, this kind of situation in the process of production, the main reason is usually produce the machine parameters of the problem, not hold good curing time and curing temperature lead to are not ripe, when doing the product first, due to the problem of operators and set the curing time is too short, and the mold temperature is too low, will appear such parts are not ripe, adjust the mold temperature and curing time can change the situation. < / p> < p> < / p> < p> < / p> < p> the silicone products are not familiar with all this kind of situation usually doesn't happen directly, unless it is a new product proofing process, the curing time of products did not meet the good result in all are not ripe. To produce this kind of circumstance is discarded directly, not as a finished product until the next working procedure. < / p> < p> < / p> < p> in zhe run too production workshop, each product is to be after several process packaging outbound, through strict quality control, can produce nuts customers satisfactory products! < / p>
For business owners unsure of how to effectively incorporate new technology into our silicone cover, life may have just become a little easier.
Dongguan ZheRunTai silicon Technology Co., Ltd will make a healthy profit for its owners and provide a rewarding work environment for its employees.
Dongguan ZheRunTai silicon Technology Co., Ltd, which contributes itself on silicone cover for creating more useful application.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...